Welcome!

General Discussion & Welcome Thread
User avatar
arcadesy
Posts: 81
Joined: Sun Feb 07, 2021 5:41 pm

Re: Welcome!

Post by arcadesy »

Welcome along GillianS!
--------------------------------
https://RageAgainstTheRetro.com
Lardo Boffin
Posts: 314
Joined: Thu Oct 24, 2019 11:47 am

Re: Welcome!

Post by Lardo Boffin »

Welcome on board!
TC-01 + TM-01 + gotek
GillianS
Posts: 6
Joined: Mon Sep 25, 2023 5:18 pm

Re: Welcome!

Post by GillianS »

Thanks for the welcome. I think I've finally found the errant '74 that was buggering up the ADC interrupt. Will try a game or two after a fresh brew.
vanpeebles
Posts: 267
Joined: Wed Oct 23, 2019 8:43 pm

Re: Welcome!

Post by vanpeebles »

Welcome!!
User avatar
deanb01
Posts: 18
Joined: Tue Mar 29, 2022 4:11 pm
Contact:

Re: Welcome!

Post by deanb01 »

MikeDHalliday wrote: Tue May 05, 2020 1:19 pm Hi there. Would you mind sharing your serial numbers? I am keeping a log of all the Einsteins still in existence and where they are located. Not seen any recently outside the UK!

Cheers

Mike.
My serial number is 6011938, and it's a working unmodified TC-01.
User avatar
yevrowl
Posts: 15
Joined: Thu Mar 05, 2026 12:47 am

Re: Welcome!

Post by yevrowl »

Greetings to All! ÷)
÷)
gunrock
Posts: 50
Joined: Sun Apr 11, 2021 10:27 pm

Re: Welcome!

Post by gunrock »

Welcome. It's a bit quiet around here of late - mostly due to Mike being "on t'road" as it were. Good to have you on board.
User avatar
MikeDHalliday
Posts: 244
Joined: Fri Oct 25, 2019 9:52 am
Location: Crewe
Contact:

Re: Welcome!

Post by MikeDHalliday »

gunrock wrote: Wed Mar 11, 2026 8:07 am Welcome. It's a bit quiet around here of late - mostly due to Mike being "on t'road" as it were. Good to have you on board.
Yep, still on the road, but still doing stuff when i can ... more msx to Einstein conversions are happening. The last 3 being football manager, elevator action and arkanoid.

I haven't personally done much in the last month due to the passing of my Mother-inlaw 3 weeks ago, but the funeral is coming up in the next couple of weeks so once that is over and we have celebrated her life, I will have some time to get back into the Einstein world.

I have plenty of ideas for things to do, and a stack of msx games to try and port, so keep an eye out here and over on the tatung bytes web site.

Something to ponder before I am back ... i have been pointed in the direction if a basic compiler for the colecovision that outputs Einstein executables, and it works really well. That is on my hit list of things to attack properly when I have time. Easy game creation by the looks of it.

More to come ....
Ex owner of a real TC01 with Gotek boot drive and second drive, Joysticks, DAC hardware (Built but untested) and loads of manuals, books and mags. Living the emulation life now!
User avatar
yevrowl
Posts: 15
Joined: Thu Mar 05, 2026 12:47 am

Re: Welcome!

Post by yevrowl »

MikeDHalliday wrote: Thu Mar 12, 2026 6:04 pm
gunrock wrote: Wed Mar 11, 2026 8:07 amWelcome. It's a bit quiet around here of late - mostly due to Mike being "on t'road" as it were. Good to have you on board.
The last 3 being football manager, elevator action and arkanoid.
Converted one of my two logic games from MSX to Tatung Einstein myself.
÷)
gunrock
Posts: 50
Joined: Sun Apr 11, 2021 10:27 pm

Re: Welcome!

Post by gunrock »

MikeDHalliday wrote: Thu Mar 12, 2026 6:04 pm
Yep, still on the road, but still doing stuff when i can ... more msx to Einstein conversions are happening. The last 3 being football manager, elevator action and arkanoid.

I haven't personally done much in the last month due to the passing of my Mother-inlaw 3 weeks ago, but the funeral is coming up in the next couple of weeks so once that is over and we have celebrated her life, I will have some time to get back into the Einstein world.

I have plenty of ideas for things to do, and a stack of msx games to try and port, so keep an eye out here and over on the tatung bytes web site.

Something to ponder before I am back ... i have been pointed in the direction if a basic compiler for the colecovision that outputs Einstein executables, and it works really well. That is on my hit list of things to attack properly when I have time. Easy game creation by the looks of it.

More to come ....
Condolences to you and your wife, Mike. Difficult times.

As regarding the basic compiler, if you mean CVBasic, then reach out to the author Oscar Toledo, he's fantastically friendly and helpful and very likely to assist.
Post Reply